---
title: "Gigaset - Manually Configure N300 and N510"
slug: "manually-configure-gigaset-n300-and-n510"
updated: 2026-08-26T08:44:40Z
published: 2026-08-26T08:44:40Z
canonical: "docs.uboss.com/manually-configure-gigaset-n300-and-n510"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.uboss.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Gigaset - Manually Configure N300 and N510

## Manually Configuring a Gigaset N300 or N510

To manually provision your N300 or N510 you will need to follow the below instructions: Browse to the IP address of the base station, this can be obtained by pressing the pairing button on the front of the base station, if the base station is powered up it will be blue. Once pressed the paired handsets will be paged with the IP address of the base station.

Once on the basestation enter your basestations pin, by default this will be: 0000 Now select the "Settings" tab at the top of the page ![image.png](https://cdn.document360.io/334a2c15-3e03-4702-a06b-0946461deedc/Images/Documentation/image%28510%29.png)

Then click on "Telephony" and you should be on the "Connections page". On then "Connections" page press Edit on IP1 On this page you will need to fill out the the following: Connection name or number: - Name of the User or Extension number Authentication name: - This is the SIP Username on Uboss Authentication password: - This is the SIP Password on Uboss Username: - Lineport without domain Display name: - Name of the User/Extension

![image.png](https://cdn.document360.io/334a2c15-3e03-4702-a06b-0946461deedc/Images/Documentation/image%28511%29.png)

Now press "Show advanced settings"

In the advanced settings fill out the following: Domain: - This is the domain of the lineport listed on Uboss Proxy server address: - sbc.insmartcloud.com Proxy server port: - 5060 Registration server: - sbc.insmartcloud.com Registration server port: - 5060 Registration refresh time: - 180

Outbound proxy mode: - Always Outbound server address: - sbc.insmartcloud.com Outbound proxy port: - 5060

Then press "Set"

![image.png](https://cdn.document360.io/334a2c15-3e03-4702-a06b-0946461deedc/Images/Documentation/image%28512%29.png)

To map a handset go to "Number Assignment" In the "for outgoing calls" column select the connection name you chose when registering the device In the "for incoming calls" column tick the connection name you chose when registering the device, and untick the other options ![image.png](https://cdn.document360.io/334a2c15-3e03-4702-a06b-0946461deedc/Images/Documentation/image%28513%29.png)

If you wish to change the name displayed on the handset change the name in the "Name" field next to INT 1, INT 2 etc

Once done press "Set"

## Factory Resetting a Gigaset N300 or N510

The Gigaset N300 and N510's can be factory resetting via a registered handset as shown in this video: [Embedded content](https://www.youtube.com/embed/3ewm0qj4pV4)

Alternatively to factory reset via the base station itself you can follow the instructions below:

1. Unplug the base unit from the power
2. Hold down the “Connect” button on the base.
3. Power on the device while keeping the “Connect” button pressed and wait 15 seconds until the “Connect” button starts to blink fast.
4. Release the “Connect” button.
5. Your base will now be reset.

The factory reset will unpair all handsets. Please follow the regular process to re-pair the handsets:

1. Press and hold the button on the front of the base unit for around 5 seconds
2. On the handset, go to Settings >> Registration >> Register Handset
3. When prompted, enter the PIN as 0000
4. The handset will then pair